Activated Carbon lenticular Depth Filter
Request a QuoteDescription
Powdered Activated Carbon (PAC) plays a critical role in the chemical, food & beverage industries, where it is commonly used for decolorization, removal of undesired by-products, and correction of taste, odor, and color profiles. However, the use of traditional bulk PAC has significant drawbacks in terms of handling the bulk carbon powder, cleaning process equipment, and the time and costs associated with carbon removal from the process. In contrast, immobilized activated carbon provides significant advantages in handling, cleaning, and cost saving. Lenticular modules with AC Series media filter alleviate these challenges by incorporating activated carbon within a robust matrix of cellulosic fibers, fully capitalizing on the benefits of immobilized carbon over conventional PAC. Moreover, AC Series immobilized carbon filter media exhibits superior adsorption efficiency compared to an equivalent amount of bulk PAC, significantly reducing overall process time and increasing product recovery.
Advantages of using Immobilized Activated Carbon vs. Bulk PAC
| Category | Bulk PAC Process | AC Series Filter Advantage | Key Improvements |
| Dusty&Safety | Dust generation; Potential health/safety risks |
Dust-free; No cleaning required. |
Eliminates fire risks; Improved health and safety. |
| Process Steps | Complex multi-step process | Single-step adsorption, decolorization,and filtration |
Reduces labor,lowers costs, shortens process time. |
| Process Times | Long prep,contact,and removal times. | Constant flow. Rapid adsorption. |
30-50%faster. Energy/resource savings. |
| Cleanliness &Maintenance | Residues require cleaning. Batch contamination risks. |
No residues. Minimal downstream filtration. |
Lower solvent costs. No cleaning downtime. |
Quality
- Filter sheets produced in a controlled environment
- Manufactured according to ISO 9001 certified Quality Management System
Food Contact Compliance
Please contact Membrane Solutions for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.
Applications
- Decolorization and removal of organic impurities in fine chemica
- Decolorization of sugar syrups
- Correction of taste and color in juice and beer applications
- Correction of off color, flavor and odors in distilled spirits
Adsorption Capability
The pore size distribution of activated carbon determines its specific adsorption mechanisms. Key properties such as iodine number, methylene blue adsorption capacity, and molasses number define its performance characteristics. Pore sizes vary between micropores, mesopores and macropores. Macropores and mesopores generally serve as pathways for molecules to enter carbon particles and are critical to adsorption kinetics. Macropores function as transport pathways, while adsorption occurs in mesopores and micropores. small molecules, such as methylene blue(molecular weight: 319.86 Da), are primarily captured in micropores. Therefore, the methylene blue dynamic binding capacity is widely used by activated carbon manufacturers as a reference for decolorization efficiency. For Ac Series depth filter sheets,over 200 g/m2methylene blue is adsorbed.
Specifications
- Materials of Construction
| Depth Filter Media | Cellulose,powdered activated carbon and wet strength agent |
| Plastics | Polypropylene |
| O-rings/Gaskets: | Silicone sealing gasket (optionally NBR,FKM) |
- Nominal Dimensions
| Cartridge Size | 12inch (design in 282mm) | 16inch(design in 425mm) | ||
| Adapter Type [1] | DOE | DOR | DOE | DOR |
| Total Height(mm) | 275 | 330 | 275 | 330 |
| Number of Cells [2] | 16 | 16 | 16 | 16 |
| Filtration Area(m²) | 1.7 | 1.7 | 4.0 | 4.0 |
[1] DOE: Double Open End (flat adapter), DOR: Double O-Ring;
[2] Modules with reduced number of cells are available upon request
- Recommended Operating Parameters
| Maximum Allowable Differential Pressure | 2.4bar(35psi)@25℃ |
| Maximum Operating Temperature | 80℃(176°F) |
| Rinsing Volume | 50 L/m² |
| Recommended Flow Rate | <20 L/min/m² |
- Recommended Sterilization
| Autoclave | Autoclave 30 min at 121℃(250°F) |
| Maximum Differential Pressure During Steam | 0.35 bar |
Filter Media Specifications and Performance
| Series | Code | Grade | Mass Per Unit Area(g/m²) |
Thickness (mm) |
Typical Water in Permeability[1] (L/min/m²) |
Ash Content (%) |
Endotoxin Content (EU/ml) |
| AC Series | C02 | CAC01 | 1200-1400 | 3.6-4.0 | 160 | <2 | <0.125 |
[1] The permeability was measured under test conditions with deioized water at Δp of 1 bar (14.5 psi). And, the water value is not related in any way
to the actual filtration flow rate
Ordering Informations
| Product Type | Filter Type | Adaptor Type | Size | Gasket Material | Number of Cells[1] |
Series |
| CRDS | C02 | D | 12 | S | 16 | C |
| CRDS | C02=CAC01 | D:Double Open End(flat adaptor) S:Double O-ring |
12:12inch 16:16inch |
S:Silicone N:NBR V:FKM |
16 | C=Carbon |
[1] Modules with reduced number of cells are available upon request



.png)