MS BagPure Pleated Filter Cartridge with High Flow
MS BagPure cartridge filter is a kind of high capacity, pleated cartridge filter. With the structure of large diameter 6 ", single-ended openings and depth materials pleated technology. The filter area is 8 times than ordinary bag filter; in this case, it can greatly reduce the maintenance cost and change frequency.With a recommended flow rate up to 50 GPM per 16inch and a suggested maximum differential pressure of 40 PSI per 16inch, BagPure cartridge filter is the optimal choice of replacement of bag filter.
Full Description
Online Ordering
暫無選擇項
Please Select a Item
Applied filters:
| Specs | Product | Optional Parameters | Availability | Operate |
|---|
Related Documents
Features
- Diameter 6 "(152 mm) is suitable for large flow and high volume applications
- The unique design of this pleated bag provides a large effective filter surface area within the space constraints of a standard bag filter basket.
- Dirt holding capacity is maximized by pleating three layers of filter media together in a single pleat pack.
- Can be directly installed in most of the no. 1 or 2 filter bag housing, do not need to change or modification
- Inside to outside flowing direction ensures all impurities trapped on inside of the filter cartridge
Applications
- Reverse osmosis system prefiltration, all kinds of process water purification treatment
- All kinds of process water, condensed water, cooling water, waste water treatment, etc
- DI water filter
- All kinds of acid, alkali, etc and other various chemicals filtration
Technical Parameters
| Materials of Construction | Filter Material | Pleated Polypropylene/Glass Fiber |
| Support Medium | Polypropylene | |
| End Cap | Polypropylene | |
| O-ring | EPDM, NBR | |
| Filter Dimensions | Outer Diameter | 6"（152mm） |
| Length | 16"(405mm) | |
| 31"(785mm) | ||
| Filtration Area | 2.8m2@16"; 4.5m2@31" | |
| Recommended Performance Parameters | Maximum Operating Temperature | 2.8 bar@60℃ |
| Maximum Operating Pressure | Deep pleated polypropylene：3.4 bar@80℃ | |
| Resin synthetic glass fiber：3.4 bar@120℃ | ||
| Recommended pressure difference for filter cartridge replacement | 2.4 bar@20℃ | |
| Flow Direction | Inside to Outside |
FAQ