Low Pressure Series
Request a QuoteDescription
MS Low Pressure (LP) series elements employs independently developed and manufactured Low-pressure-specific polyamide composite membrane sheets. These elements are suitable for desalination of feed water with salt concentration below 3000mg/L. Featuring hgh desalination rates, low operating pressures, and high membrane flux, this porduct is widely appliable to desalination projeccts using municipal tap water, groundwater, and similar sources. Applications include residential direct drinking water and water for production in food and beverage enterprises.
Features
-
High permeate flow and salt rejection under low pressure
-
Salt rejection rate up to 99.3%
-
Removing soluble salts, TOC, SiO2, etc
-
Decreasing the cost for relevant facilities and operating cost for the RO system
Typical Applications
-
Pure water production
-
Boiler feed water
-
Foodstuff processing
-
Pharmaceutcal production
Technical Parameters
|
Performance |
Salt rejection (%) |
99.3 |
|
Feed spacer (mil) |
28 |
|
|
Test |
Test water Pressure(psi) |
150 |
|
Test Solution |
NaCI Solutions |
|
|
Test water temperature(℃) |
25 |
|
|
Recovery rate per element(%) |
15 |
|
|
Operating |
Max.operating pressure(psi) |
600 |
|
Max.operating Temperature(℃) |
45 |
|
|
Max.pressure drop for each element(psi) |
15 |
|
|
Chemical feed water PH (30min) |
1-13 |
|
|
Continuous feed water PH |
2-11 |
|
|
Maximum Feed water SDI |
5 |
|
|
Feed water chlorine concentration(ppm) |
≤0.1 |
|
|
Max.Feed water flow (gpm) |
16 for 2.5/4.0 inches |
Ordering Information
|
LPRO-MS |
Model No. |
Dimensions(mm/inch) |
Effective surface |
Product flow rate |
|||
|
A (Length) |
B(Diameter) |
C |
D |
||||
|
2521 |
|
|
|
|
11/1.0 |
|
|
|
2540 |
|
|
|
30/1.18 |
|
|
|
|
4021 |
|
|
|
|
|
|
|
|
4040 |
|
|
19.1/0.75 |
|
90/8.4 |
2400/9.1 |
|
|
8040-365 |
1016±1/40 |
201.9±1/8.0 |
28.6/1.125 |
/ |
365/33.9 |
9600/36.3 |
|
|
8040-400 |
1016±1/40 |
201.9±1/8.0 |
28.6/1.125 |
/ |
400/37.2 |
10500/39.7 |
|
|
8040-440 |
1016±1/40 |
201.9±1/8.0 |
28.6/1.125 |
/ |
440/40.9 |
12650/48 |
|
