30mm syringe filter
Request a QuoteIntroduction
MS® 30mm diameter syringe filters is characterized by color edge design, which visualizes the membrane type directly. The over molding process helps filter stands more operation pressure. The preset GF prefilter speeds the flow rate up significantly. Wide range of membrane options and pore sizes bring with a broader chemical compatibility. All of them are produced with high quality and cost-effectiveness in 100000 clean room under strict QC and QA procedures.
Features
- Filter Ø: 30 mm; Filtration area: 4.9cm2, has more than 40% larger filtration area than the 25 mm filter.
- Ideal for use with bioreactors and fermenters
- Have broad chemical resistance
- For use with sample volumes of 2-100ml. Their enhanced luer-lok inlet provides secure connections and eliminates
- Each manufacturing lot is tested for burst pressure of housing, bubble point, and flow rate performance.
Applications
- Sterile venting of carboys, filling vessels, fermentation tanks, bioreactors
- Venting of small product or intermediates tanks
- Small volume venting and degassing
- Sterile gas purging of culture vessels
- Sterile gas delivery to instruments, incubators and culture vessels
- Protection of laboratory personnel from vacuum pump exhaust contaminants
- Filter low volumes of aggressive solvents and aqueous solutions
- Protect pump components from liquid damage by using between a pump and receiving vessel
- Chromatography solutions
- Reagents
Specification
| Diameter | 30mm |
| Color Code | YES |
| Pre-filtration | GF |
| Process | Over molding |
| Large effective Filtration Area | 5.39 cm2 |
| Housing Material | PP |
| Pore Size | 0.22 μm, 0.45 μm & more |
| Holdup Volume | <100 μl |
| Sample Volume | <200 ml |
| Inlet Connection | Female luer lock |
| Outlet Connection | Male luer slip |
| Flow Direction | Enter from INLET |
| Maximum Operating Temperature | 130 °C |
| Maximum Operating Pressure | 6 bar |
| Sterilization Option | Gamma Radiation |