17mm syringe filter
Request a QuoteIntroduction
Membrane Solutions’ new 17mm syringe filters have color-coding housings providing easy identification of membrane and porosity. Their enhanced luer-lock inlet provides secure connections and eliminates filter 'blow-off'. 17mm syringe filters supply Nylon, PTFE, PES, MCE and PVDF which are available in 0.22um, 0.45um pore sizes. 17 mm syringe filters (upper) offer up to 70% more filtration area than traditional 13 mm filters (lower).
Features
- Filter Ø: 17 mm; Filtration area: 1.65 cm2, has more than 40% larger filtration area than the 13 mm filter.
- Ideal for use with bioreactors and fermenters
- Color-coded housing allows for easy identification of membrane
- Have broad chemical resistance
- Enhanced luer-lock inlet provides secure connections and eliminates
- Each manufacturing lot is tested for burst pressure of housing, bubble point, and flow rate performance.
Applications
- Sterile venting of carboys, filling vessels, fermentation tanks, bioreactors
- Venting of small product or intermediates tanks
- Small volume venting and degassing
- Sterile gas purging of culture vessels
- Sterile gas delivery to instruments, incubators and culture vessels
- Protection of laboratory personnel from vacuum pump exhaust contaminants
- Filter low volumes of aggressive solvents and aqueous solutions
- Protect pump components from liquid damage by using between a pump and receiving vessel
- Chromatography solutions
- Reagents
Specifications
| Diameter | 17mm |
| Color Code | YES |
| Pre-filtration | GF |
| Process | Over molding |
| Large effective Filtration Area | 1.65cm2 |
| Housing Material | PP |
| Pore Size | 0.22μm, 0.45μm & more |
| Holdup Volume | <25μl |
| Sample Volume | <10ml |
| Inlet Connection | Female luer lock |
| Outlet Connection | Male luer slip |
| Flow Direction | Enter from INLET |
| Maximum Operating Temperature | 80°C |
| Maximum Operating Pressure | 6 bar |
| Sterilization Option | Gamma Radiation |